PERMANENT FCC MOD
NOW COMPATIBLE ALSO WITH RC2!
WHAT IS THIS?
DJI DRONES HAVE TWO TRANSMISSION POWER LEVELS (CE AND FCC) THAT SWITCH BASED ON LOCATION
CE IS FOR EUROPE, UK ETC, IS VERY WEAK, DOESN'T GO FAR AND IS PRONE TO INTERFERENCES
FCC IS FOR US, CANADA, CHINA ETC, IT USES THE FULL TRANSMISSION POWER OF YOUR DRONE, CAN GO FURTHER AND FLY SAFER FROM INTERFERENCES, UNWANTED LOSING OF SIGNAL AND DANGEROUS RTH
DJI RC FCC IS A TOOL THAT ALLOWS YOU TO SWITCH YOUR DRONE IN FCC MODE
ALSO UNLOCKS 500M IN EU COUNTRIES
SERVER ONLINE
OPERATION NOT GUARANTEED AS
THERE ARE ISSUES LATELY
ALWAYS RUN THE TOOL FIRST AND CHECK FOR "CONNECT SUCCESS" BEFORE UPDATING OR REFRESHING FIRMWARE OR YOU MAY LOSE FCC
DJI RC FCC 1.5 IS OUT NOW, THE DOWNLOAD FOLDER IS ALWAYS THE SAME, IF YOU DON'T FIND IT SEND A MAIL TO GET THE UPDATED TOOL
COMPATIBILITY
DJI RC V01.03.1200 (NOT LATEST)
01.03.0400 AND LATER REQUIRE EXTRA STEPS DURING INSTALLATION (2)
01.03.1300 AND LATER CANNOT BE PATCHED DIRECTLY (1) AND ARE NOT DOWNGRADABLE
DJI RC 2 V02.00.0200( NOT LATEST)
02.00.0300 AND LATER CANNOT BE PATCHED DIRECTLY (1) AND ARE NOT DOWNGRADABLE
INSTALLING PATCH ON 02.00.0100 OR LOWER CAN END UP ON 02.00.0300
THIS IS NORMAL AND WILL HAVE FCC
DJI RC PRO V03.02.0700 (LATEST)
MAVIC 3 - PRO - CLASSIC - MINI 3 PRO - MINI 4 PRO - MINI 3 - AIR 2S - AIR 3
ALSO AVAILABLE FOR RM500 - RM510B - RM700
SEND A MAIL FOR DETAILS
RC-N1/N2 NOT COMPATIBLE
FUTURE COMPATIBILITY IS AND SERVER OPERATION ARE NOT GRANTED, ALWAYS DOUBLE CHECK COMPATIBILITY AND IF SERVER IS WORKING BEFORE UPDATING OR RESETTING YOUR RADIO
THE MOD STAYS AS LONG AS YOU DON'T UPDATE OR RESET (OR CHANGE RADIO LIKE SENDING IT FOR REPAIR)
ONCE THE MOD IS INSTALLED IS YOUR RESPONSIBILITY TO KEEP IT WORKING AND CHECKING COMPATIBILITY
NO REFUNDS WILL BE ISSUED
(1)
AT YOUR OWN RISK THERE IS A WAY TO UPDATE DJI RC OR RC 2 TO LATER UPDATES AND KEEP THE FCC ACTIVE
YOU CAN CHECK IF IT'S SAFE TO UPDATE BY CONNECTING YOUR RADIO AND RUNNING THE ADB CHECKER TOOL, IF YOU GET "ADB IS RUNNING" MESSAGE, YOU CAN UPDATE RC AND REAPPLY PATCH
IF NOT, RUN FCC PATCH AGAIN BEFORE UPDATING AND CHECK AGAIN, IF ADB IS RUNNING UPDATE AND PATCH AGAIN
THERE IS A COOLDOWN OF 2 HOURS BETWEEN FCC INSTALLS, TURN RADIO OFF AND YOU WILL BE ABLE TO INSTALL FCC AGAIN ON THE NEW FIRMWARE AFTER 2 HOURS
AFTER THIS YOU SHOULD BE ABLE TO UPDATE TO FUTURE UPDATES AND STILL BE ABLE TO APPLY FCC, BUT ALWAYS TRIPLE CHECK THIS PAGE OR SEND A MAIL
BE CAREFUL AS THERE IS NO WAY TO GO BACK IF SOMETHING GOES WRONG AND YOU WILL BE STUCK IN CE
(2)
FOR DJI RC 01.03.0400 AND FURTHER
PUT A MICRO SD CARD IN THE RC
DURING THE FCC INSTALL A FILE WILL BE DOWNLOADED
IN TOOL FOLDER AND YOU WILL BE PROMPTED TO REPLACE FILES
FOLLOW THE VIDEO IN THE TOOL FOLDER
YOU NEED TO BE QUICK AS THE OPERATION HAS A TIME LIMIT
HOW DOES IT WORK?
INITIAL SETUP
READ INSTRUCTIONS CAREFULLY!!!
-
YOU NEED A WINDOWS PC (10 or 11) OR A WINDOWS VIRTUAL MACHINE ON MAC
-
DOWNLOAD DJI ASSISTANT 2 FOR CONSUMER DRONES
-
DOWNLOAD DJI RC FCC.EXE BY FOLLOWING THE INSTRUCTIONS BELOW
-
SEND A MESSAGE TO djircfcc@gmail.com
-
THE TOOL GETS PACKAGED (FOLDER WITH INDIVIDUAL KEY AND TOOL)
-
DONATE AT LEAST 69 USDT (CRYPTO) OR 120 FOR ENTERPRISE TO THE ADDRESS GIVEN IN MAIL
-
IF YOU DON'T USE CRYPTO OTHER WAYS CAN WORK
-
YOU WILL RECEIVE THE DRIVE DOWNLOAD LINK AND YOU ARE READY TO MOD!
DJI ASSISTANT
-
OPEN DJI ASSISTANT
-
TURN ON THE RC
-
CONNECT THE RC TO COMPUTER WITH USB C CABLE
-
CHECK IF RC CONNECTS AND CHECK FIRMWARE VERSION
-
CLOSE DJI ASSISTANT
-
KEEP RC CONNECTED FOR NEXT STEP
-
IF IT DOESN'T CONNECT TRY CHANGING PORT OR USB CABLE
DJI RC FCC
-
THE RC IS STILL CONNECTED TO PC FROM PREVIOUS STEP
-
YOU NEED TO BE CONNECTED TO THE INTERNET
-
IN THE FOLDER YOU DOWNLOADED THERE WILL BE 2 FILES
-
DJIRCFCC.7Z AND PASS.TXT
-
UNZIP DJIRCFCC.7Z WITH A TOOL LIKE 7ZIP
-
ARCHIVE PASSWORD IS djircfcc
-
RUN THE .EXE, FIRST RUN IS GOING TO ASK FOR YOUR LICENSE
-
IF IT FAILS TO CONNECT WITH SERVER CLOSE THE TOOL AND TRY AGAIN
-
ONCE SUCCESSFULLY BOUND THE TOOL WILL CLOSE
-
RUN IT AGAIN AND IT WILL PATCH YOUR RC (MAY REQUIRE MULTIPLE RUNS)
-
ON SOME RADIOS AND FIRMWARES YOU WILL BE PROMPTED TO UPDATE/REFRESH FIRMWARE
-
DJI RC 01.03.0400+ REQUIRES REPLACING A FILE IN RADIO, REFER TO (2) IN COMPATIBILITY TAB
-
IF SUCCESSFUL YOU WILL GET A FCC SUCCESSFUL MESSAGE AND THE RC WILL QUICK REBOOT
-
DO NOT UNPLUG OR TURN OFF THE RC UNTIL REBOOTED
-
ONCE REBOOTED FCC IS ON!
-
THE PATCH STAYS UNTIL YOU RESET OR UPDATE THE RC
-
IF YOU RESET OR UPDATE AND WANT FCC BACK, RUN THE TOOL AGAIN!
-
BEFORE UPDATING THE RC CHECK IF THE PATCH WORKS WITH THE NEW VERSION
-
ALWAYS CHECK THE WEBSITE BEFORE DOING ANYTHING TO YOUR RADIO
COMMON ERRORS FIX
-
INSTALLATION PROHIBITED -> TOOL IS NOT READING YOUR LICENSE, PASS.TXT HAS TO BE IN THE SAME FOLDER AS THE .EXE, EXTENSIONS HAVE TO BE VISIBLE (.TXT)
-
MAKE SURE RADIO IS CHARGED AND THERE IS STORAGE SPACE
-
ERROR READ FILE -> DON'T WORRY ABOUT IT
-
TRY CHANGING PORTS AND CABLES
-
TRYING WITH A DIFFERENT PC MAY HELP
-
REMEMBER TO CLOSE DJI ASSISTANT AND TURN DRONE OFF
ENJOY!
CHECK IF YOU ARE IN FCC
CONGRATULATIONS!
NOW YOUR DRONE IS IN FCC AND YOU CAN REALLY FEEL THE DIFFERENCE
IF YOU WANT TO CHECK BEING IN FCC MODE GO IN THE TRANSMISSION TAB IN DJI FLY AND LOOK AT THE GRAPH
IF YOU ARE IN CE THE -90 LINE WILL BE AT THE SAME HEIGHT AS 1KM INDICATOR
IF YOU ARE IN FCC THE -90 LINE WILL BE LOWER THAN THE 1KM INDICATOR
IMPORTANT DISCLAIMER!!!
THIS TOOL IS FOR TESTING AND EDUCATIONAL PURPOSES ONLY, USING A STRONGER TRANSMISSION POWER WHERE NOT ALLOWED IS ILLEGAL, IT'S YOUR RESPONIBILITY TO CHECK LOCAL REGULATIONS AND FOLLOW THEM
YOU GET THIS SOFTWARE "AS IS", THERE IS NO WARRANTY AND YOU ARE RESPONSIBLE FOR ALL RISKS INVOLVED (EXAMPLE: DJI FIXES IT, STOPS WORKING, LOSS OF DJI WARRANTY, DAMAGE TO YOUR RC, NOT WORKING WITH YOUR GEAR)
LICENSES ARE NOT TRANSFERABLE BETWEEN RADIOS, A NEW RADIO REQUIRES A NEW KEY
THAT SAID IT WORKS FOR NOW AND BEING REVERSIBLE SHOULD NOT VOID YOUR DJI WARRANTY
IF YOU NEED ANY HELP OR HAVE SUGGESTIONS SEND A MAIL TO